Frequently Asked
Questions

Triumph Concrete Coatings is a South Jersey shop based in Salem, NJ. The Triumph Concrete Coatings crew installs polyurea and polyaspartic coating systems on garages, basements, pool decks, patios, driveways, and commercial floors, bringing commercial-construction prep discipline to every job.

Our home base is 306 Quinton-Marlboro Road, Salem, NJ 08079. We are mobile by nature — every install is on-site — but Salem is where the trailer goes home at night and where free on-site estimates start from.

We cover Salem, Gloucester, Camden, and Burlington counties — including Cherry Hill, Haddonfield, Moorestown, Mullica Hill, Turnersville, Medford Lakes, Chesterfield Township, and the towns in between. If you are close to those, just call. We routinely look at floors in cities that are not on the list.

No scripted sales call, no rotating crew, no national catalog with one system for every slab. You meet the Triumph Concrete Coatings team, they look at the floor, they tell you what it actually needs — and the same crew is grinding it the morning the work starts. That is the whole pitch.

Garage floor coatings, pool deck coatings, basement floor coatings, patio coatings, driveway coatings, commercial floor coatings, and grind-and-seal. All of them are built on the same commercial-grade prep — diamond grinding, crack repair, and moisture management — before any color goes down.

Old-school epoxy is brittle, slow to cure, and yellows in sunlight. Polyurea is roughly four times tougher than residential epoxy, cures fast enough to walk on the same day, and stays flexible so it does not crack with the slab. We do not install old-school epoxy on residential floors.

Acrylic sealers wear off in a couple seasons and require recoating. A polyaspartic topcoat is UV-stable, chemical-resistant, and bonded to a polyurea basecoat — not just rolled on top of bare concrete. It lasts years longer and shrugs off salt, gas, and hot tires.

Yes — that is exactly where polyaspartic shines. Outdoor coatings need UV stability, slip resistance, and freeze-thaw tolerance. We spec a textured polyaspartic system for decks and patios so the surface stays cooler underfoot, drains well, and does not turn yellow in the sun.

All three. Basement systems include moisture testing and vapor management before coating. Garage systems are our most common install. Commercial floors — showrooms, warehouses, light industrial — get a thicker build and an aggressive topcoat spec, scheduled around your operating hours.

Most residential garages are a one-day install — prep, basecoat, flake, and topcoat all in the same visit. Larger commercial floors and multi-bay garages may run two days. We will give you a written timeline before we start, not a vague window.

Yes — the floor needs to be completely empty so we can grind every square foot. We will tell you when to move things out, and we are happy to discuss tricky cases (workbenches, cabinets, freezers) in advance so there are no surprises on install day.

Foot traffic is typically same evening. Light traffic (rolling a tool chest, walking the dog) the next morning. Vehicle traffic at 24 to 48 hours, depending on temperature. We give you the exact times in writing for the day we install — cold mornings push the cure window out.

Diamond grinding the entire slab to a uniform profile, chasing and filling cracks and control joints, repairing spalled edges and pits, vacuuming the dust down to a clean surface, and moisture-testing if conditions warrant. The prep is the warranty — we never substitute an acid wash.

Most two-car garages land between $2,400 and $4,200 depending on square footage, slab condition, and system selected. Larger garages, decorative flake upgrades, and serious surface repair move the number. You will get a written, itemized quote — never a verbal "trust me."

Yes — free, on-site, and not high-pressure. The Triumph Concrete Coatings team walks the slab, takes measurements and photos, and writes the quote on the spot or follows up the next business day. No deposit is required to get a number.

We can point you toward home-improvement financing options that work for coating projects — ask about it during the estimate and we will walk you through what is available. We are not pushing a particular lender on you.

Our polyaspartic systems carry a residential warranty against peeling, delaminating, and chipping under normal use. The exact term and coverage are spelled out in writing on every job — not buried in fine print. The single biggest reason coatings fail is bad prep, which is the part we refuse to cut corners on.

A soft-bristle broom, a mop, and warm water with a mild pH-neutral cleaner is all you need. The topcoat is non-porous — spills wipe up rather than soaking in. Skip harsh acid cleaners and bleach; they are not needed and can dull the sheen.

Hot tire pickup is the classic DIY-epoxy failure mode — soft, low-grade coatings literally peel off when a hot tire cools on them. Our polyaspartic systems are spec’d specifically to resist that. With proper prep underneath, hot tires are a non-issue.

A properly prepped polyaspartic floor in a residential garage typically holds for 15 to 20-plus years before any meaningful recoating is needed. Commercial floors in high-abuse environments may need a topcoat refresh sooner, but the basecoat keeps doing its job.

Yes. Spot repairs to gouges or impact damage can be cut in, color-matched, and feathered into the existing topcoat. If the damage is widespread, we can re-topcoat the whole floor without redoing the basecoat or flake.